Our range of turbine engine wash cart comprises a 145 litre brim capacity sintex tank that have provision to house a stainless steel tank with a capacity of 60 litre to hold the wash chemical, above the sintex tank. These are manufactured from quality tested components that are imported from U.S.A, Taiwan and Mumbai. Available in various specifications, these are offered at industry leading prices.

Our range of Turbine Engine Wash Cart is available with:

• Two duplex pumps (one to handle water and on to handle the wash chemical)
• A Honda g.k. 500 engines with manual petrol start and kerosene run to drive both the pumps simultaneously
• A panel board to control and regulate the pressure and fluid flowing to the engine nozzles
• The mild steel powder coated panel board is consisting of 4 numbers of on off" valves and 2 direction valves to choose from them.
• On the final output line of each pump is provided a mesh filter and output 100 micron filter.

We manufacture Ground Power Unit for our clients spread worldwide. These units are available in 25" length, 19 breadths and with 12" height. It is constructed of mild steel "l" angles of size 1" xi" with a thickness of 5mm and the frame is covered with 18 gauge mild steel sheets. Known for its quality, durability and utility, these are appreciated worldwide.

Some of its specifications include:

• It is provided with a tapered lid to cover the Ground Power Unit. box from above. 4 nos of 12" diameter
• Wheels are provided to cart the Ground Power Unit.
• A250 v. a.c. 50hz stepped down and rectified to50vd.c. 10 amperes power supply provides in the front end of the Ground Power Unit.

We manufacture and supply nitrogen cart to house 2 nitrogen cylinders of nitrogen with 3 wheels and 2 feet tow bar. These are constructed in mild steel and powder coated golden yellow" in color. Quality tested on well defined parameters, these are offered at industry leading prices.

We provide our clients with a wide range of Double Cylinder Compressor and engine Wash Rig which is characterized by immaculate quality and reliable performance. Available in various specifications, these are quality tested on well defined quality parameters before being delivered to our clients.

Below mentioned are its specifications

• 2 S.S. 316 bullets (cylinder).with fluid capacity of 10 litres is connected to a common control panel.
• Height of the cylinders is 11 and dia of 85 each.
• Pressure bearing capacity of each cylinder is 150 psi.
• The control panel is made of m. s and is powder coated
• Provided on the panel is a pressure input non-return nozzle. individual pressure relief valve (adjustable), common pressure gauge of 100 ps treading
• Directional input valves and directional output valves. a common pressure input valve with quick release coupling to connect to hose for connection from cylinder trolley to the compressor is provided
• A two wheeled tow carriage with 8" wheels and a handle and vertical mounted control panel (ms powder-coated) for carting of the cylinder is provided.

We are engaged in offering quality range of cleaning bay that is designed to perfection for high efficiency. Known for its high quality&utility these are widely used in aviation industries and research institutes across the globe. We also meet customized requirement for our clients benefit

These are available with:

• A sink of size 3 feet 1foot deep at the bottom is given 2 1/5" drain to handle the waste kerosene
• The base of the sink is 2feet above the floor and the sink is mounted on pipes of all the borders
• The unit can be constructed of mild steel powder coated /epoxy coated or of buffed stainless steel

We provide our clients with a wide range of starter generator brush bedding table which is characterized by immaculate quality and reliable performance. Available in various specifications, these are quality tested on well defined quality parameters before being delivered to our clients.

Below mentioned are its specifications

• The machine consist of a mild steel angle frame bed of size: 48"length x 32"breadth x3 ' height
• On the table is mounted a wooden plank 1" thick covering the whole table top on which is fixed a 1/2 hp. p.m.d.c motor
• The motor has a speed controllable from 0 to 500 rpm
• Under the table is provided a panel board to house a digital rpm.
• meter (upto 999 rpm)
• A digital volt meter to measure the output of the starter generator and a speed controller for the motor the rpm
• The motor is connect to the starter generator by a nylon rigid coupling
• To hold the starter generator is provided a round clamp fastened on the table
• For the safety of the operator is provided a guard on the rigid coupling
• All the mild steel parts is powder coated and the wooden plank is covered with wood fin (poly urethane) paint

Our range of skit holder is used for holding skit's of helicopters during transport. Manufactured from quality tested components, these are known for its high quality, durability and optimum usage. Available in various specifications, these are offered at industry leading prices.

We are engaged in offering quality range of ground support ramp that is designed to perfection for high efficiency. Known for its high quality&utility these are widely used in aviation industries and research institutes across the globe. We also meet customized requirement for our clients benefit

• High tensile strength
• Excellent durability
• High efficiency
• Corrosion resistance
• Low maintenance

We are engaged in offering quality range of Recirculating Kit for Kerosene that is designed to perfection for high efficiency. Known for its high quality&utility these are widely used by our clients spread across the globe. We also meet customized requirement for our clients benefit.